Shure SVX188CVL Dual-Channel Presenter System with Lavalier Microphones

The Shure SVX188CVL Dual Wireless Lavalier System Includes :

1 x SVX88 Receiver
2 x SVX1 Bodypack Transmitters
2 x CVL Lav Condenser Mics

SVX88 Receiver

Features : 

• Up to 8 selectable channels
• Up to 4 compatible systems
• Operational Frequency : 558 - 570MHz
• Antenna Switching : Diversity 
• Adjustable Squelch Level
• 1/4" and XLR output

Specifications :

• Dimensions : 32 mm X 168 mm X 104.5 mm
• Weight: : 245 g
• Housing : Molded ABS
• Audio Output Level :
  • XLR connector into 100 k ohm load : -16 dBV (MIC)
  • 6.35 mm connector into 100 k ohm load : -22 dBV (MIC)
• Output Impedance :
  • XLR connector : 600 ohm
  • 6.35 mm connector : 600 ohm
• Sensitivity : –105 dBm for 12 dB SINAD, typical
• Image Rejection : >50 dBm, typical
• Power Requirements : 12 to 18 V DC @ 130 mA, included external power supply

SVX1 Transmitter

Specifications : 

• Transmitter Type: Bodypack
• Dimensions : 108 mm height X 64 mm width X 19 mm depth
• RF Output Power : 10 mw
• Battery endurance : 10 h
• Weight : 90 g

CVL Lavalier Microphone

Features : 

• Miniature clip-on lavalier mic
• Permanently charged electret condenser element
• Cardioid polar pattern rejects unwanted noise
• Included tie clip allows for hands-free use, perfect for presenters
• Included windscreen reduces plosives, wind and breath sounds
• Tailored frequency response optimized for speaking and presentations
• TA4F (TQG) connector

Specifications : 

• Transducer Type : Condenser
• Polar Pattern : Cardioid
• Frequency Response : 50 Hz - 20 KHz
• Sensitivity (dBV/Pa) : -43.5 dBV/Pa
• Weight : 25 g
• Output Impedance : 600 ohm @ 1 kHz
• Signal-To-Noise Ratio [1 ] : 72 dB @ 1 kHz
• Maximum SPL [1] : 139.0 dB 1000 ohm load, @ 1% THD
• Dynamic Range [1] : 117.0 dB @ 1 kHz, 1000 ohm load
• Equivalent Output Noise [1] : 22 dB Typical, A-Weighted
• Power Requirements : +5 V DC (nominal), 10 V maximum (DC bias)
• Cable : 1.3 m
• Connector : TA4F