Rode Wireless & Lav GO Bundle with DCS1 Dual Cold Shoe Mount & SC11 Adaptor
This Bundle Includes:
- 2 x Rode Wireless GO Systems
- 2 x Rode LavGO Lavalier Microphones
- 1 x Rode DCS1 Dual Cold Shoe Mount
- 1 x Rode SC11 TRS Splitter Cable
Wireless GO is an ultra-compact digital wireless microphone system which is unique in its clip’n’go versatility, incredibly compact form-factor, and unmatched price accessibility. It’s the perfect wireless mic for content creators in all disciplines: filmmakers, on-camera presenters, newsgatherers, vloggers and more.
The Wireless GO’s quick clip-on capabilities make it perfect for run-and-gun journalists and vloggers in the field – no cables and great sound.
Features :
- Clip-on mic. or beltpack transmitter for a lavalier/headset microphone
- Built-in omnidirectional condenser mic. delivers broadcast-quality sound
- 2.4GHz digital wireless transmission with 128-bit encryption delivers crystal clear audio even in locations with dense Wi-Fi and Bluetooth activity like shopping malls, conventions, hotels etc
- Up to 70m range (line-of-sight), but optimised for shorter-range in congested radio-freq. environments
- TX and RX have built-in rechargeable batteries, charged via USB-C
- Up to 7 hours on a full charge, including a battery-saver mode
- Transmitter and receiver pair in just 3 seconds
- 3-stage output pad: 0, -6dB and -12dB
- Use up to 8 systems in one location
Technical :
- Transmission type : 2.4GHz Digital Frequency Agile System
- Acoustic Principle : Pre-polarised pressure transducer
- Polar Pattern : Omnidirectional
- Equivalent Input Noise @ Max Gain : 21.8dB (A-Weighted)
- Frequency Range : 50Hz - 20kHz
- External Mic Input : 20Hz - 20kHz
- Max Output Level : +3dBu
- Max SPL : 100dB SPL (1kHz @ 1m)
- Dynamic Range : 100dBA (Mic Preamplifiers)
- Power : Inbuilt Li-po battery rechargeable via USB
- Battery Life : Up to 7 hours
- Analog Inputs : 3.5mm TRS lavalier mic. input (transmitter)
- Analog Outputs : 3.5mm TRS (receiver)
- Computer Connectivity : USB (firmware update)
- Form Factor : Clip-on pack
- Weight (g) : TX: 31, RX: 31
- Dimensions (L x W x H, mm) : TX: 44 × 45.3 × 18.5, RX: 44 x 46.4 x 18.5
- Included Accessories : fur windshield, pouch, USB-A to USB-C cables, SC2 cable
Lavalier GO is a professional-grade wearable microphone designed for use in a wide range of applications. The 3.5mm TRS connector is designed to pair perfectly with the RØDE Wireless GO and most recording devices with a 3.5mm TRS microphone input.
Lavalier GO is designed to perform excellently in any broadcast application. Featuring a discreet 4.5mm omnidirectional microphone, it delivers crystal clear audio in all environments and is incredibly forgiving when it comes to placement on talent, allowing for greater flexibility in fast-paced situations. A foam pop shield is supplied to minimise wind noise and vocal plosives (hard ‘b’, ‘t’ and ‘p’ sounds), as well as a durable mounting clip with in-built cable management for quick and easy rigging. It also features a hard-wearing Kevlar® reinforced cable, designed to withstand the rigours of any shoot.
Features:
- Professional-grade lavalier mic with 3.5mm TRS jack
- High-quality omnidirectional condenser capsule
- Discreet 4.5mm miniature microphone
- Kevlar® reinforced cable
- Includes pop shield and durable mounting clip Lavalier GO
Technical:
- Acoustic Principle : Permanently Polarised Condenser
- Polar Pattern : Omni-directional
- Frequency Range : 20Hz - 20kHz
- Output Impedance : 3k Ω Typical
- Signal to noise Ratio : 67 dB
- Equivalent Noise : 27 dB Typical
- Maximum SPL : 110 dB
- Sensitivity : -35dB (17.8mV @94dB SPL)
- Dynamic Range : 83dB Typical
- Power Requirements : Powered from plug-in power TRS socket (2.7V)
- Output Connection : Gold-plated TRS plug
The DCS-1 is a dual cold shoe mount for mounting two microphones or cold shoe accessories on a device with a single cold shoe mount. Constructed from lightweight aluminium, it is sturdy and discreet and is compatible with all RØDE products that feature a cold shoe adaptor. It also includes cable management slots for select RØDE audio cables.
- Rugged construction
- Lightweight and discreet
- Sturdy base with ¼” thread
When paired with the SC11, it provides a neat, streamlined solution for connecting two microphones to a single DSLR-style camera or recording device, for example dual Wireless GO receivers, or a wireless receiver and a VideoMic.
The SC11 is a TRS splitter cable for connecting two mono outputs to a single stereo input. It is particularly suitable for connecting two microphones to a single DSLR-style camera, for example dual Wireless GO receivers, or a wireless receiver and a VideoMic.
The SC11 is 275mm in length and is compatible with the cable management slots in the RØDE SM7-R and DCS-1 mounts.
The output segment has in-built memory wire for neat cable positioning around your camera and the input segment is split into two – the black end records to the left channel, the red end records to the right.
- Output Connection Dual TRS 3.5mm
- Input Connection TRS 3.5mm
- Length 275mm
(KIT-327)
SKU | KIT-327 |
Brand | Rode |
Shipping Weight | 0.9500kg |
Shipping Width | 0.110m |
Shipping Height | 0.260m |
Shipping Length | 0.130m |
Shipping Cubic | 0.003718000m3 |
Be The First To Review This Product!
Help other CCs Light & Sound Pty. Ltd. users shop smarter by writing reviews for products you have purchased.